Ivan's RV-7

Priming the skins and the stiffenersTimer icon2h

June 2, 2022

A short session of cleaning everything and shooting the primer.

Same procedure as before: clean everything with the EkoClean, etch with the EkoEtch, then prime with the EkoPoxy.

Stiffeners primed. The right skin. The left skin.

There were some corrosion spots on the outer side of the skin. I think the paint drop cloth I use while etching absorbed too much of the etcher, so placing parts on it makes these parts to be etched from the opposite side. Not a big issue as all exterior skins will be eventually scuffed for the painting.