November 2025
October 2025
- 10-24 3h Installing aftermarket aileron bellcranks
- 10-19 4h Continuing with the left wing
- 10-18 4h Started on the left wing bottom skins
- 10-15 2h Finished riveting the bottom skins
- 10-13 2h Short riveting session
- 10-12 4h Continuing riveting the bottom skin
- 10-11 3h Riveting the bottom skins
- 10-10 3h Priming the bottom skins
- 10-05 3h Hanging the flaps
- 10-04 2h Deburring the skins
- 10-02 2h Finishing wiring the right wing
September 2025
- 09-28 1h Wiring the right wing
- 09-27 3h Supporting the wires
- 09-26 3h Rebuilding the Archer antenna
- 09-24 2h Installing the Archer antenna
- 09-20 3h Assembling small pushrods
- 09-19 1.5h Working on aileron pushrods
- 09-17 1h Creating brackets to hold the wires
- 09-16 3h Riveting aileron fairings and flap braces
- 09-15 1.5h Priming aileron fairing and flap braces
- 09-14 1h Installing left position/strobe lights
- 09-13 4h Installing left wing avionics
- 09-07 20h Pressing flanges in the ribs
August 2025
- 08-31 2h Cutting a hole for the pitot mast
- 08-25 2h Attached the right fuel tank
- 08-24 6h Finished riveting the top skins and made a wing cradle
- 08-17 3h Riveting the top skins
- 08-15 4h Riveting the top skins
- 08-10 3h Preparing the top skins
- 08-09 2h Testing the fuel tank
- 08-04 2h Sealing the cover
- 08-03 4h Riveting the rear baffle
- 08-02 4h The inboard rib and the z-brackets
June 2025
May 2025
April 2025
March 2025
February 2025
January 2025
December 2024
- 12-31 1h Working on the fuel sender plate
- 12-26 2.5h The inboard rib and the fuel sender
- 12-25 3h The outboard rib
- 12-24 2.5h The fifth rib and a vent line
- 12-23 2.5h The fourth rib
- 12-21 2.5h The third rib
- 12-15 2.5h Riveting the second rib
- 12-14 4h Riveting the first rib
- 12-08 6h Riveting stiffeners to the fuel tank skin
- 12-07 4h Various small tasks in preparation of the fuel tank assembly
- 12-01 2h Drilling the fuel tank skins
November 2024
September 2024
- 09-20 1h Finishing the right aileron
- 09-19 4h Riveting the right aileron
- 09-18 5h Riveting the left aileron
- 09-17 2h Priming the aileron ribs and the spar
- 09-16 3h Drilling the counterbalance pipes
- 09-15 4h Priming more ribs and drilling the aileron spars
- 09-14 2h Riveting the aileron stiffeners
- 09-13 1.5h Priming the aileron skins
- 09-08 1.5h Priming the aileron stiffeners
- 09-07 3h Deburring the aileron stiffeners
- 09-02 2.5h Priming the second set of wing ribs
