Continued drilling the fuselage
1.5h
February 15, 2023
Drilled a few more holes.
The first thing I did today was to trim the longerons so the skins extend 3/4" past the forward edge of the longeron. I used my thin kerf so to cut the longerons.
Then I clamped and drilled the front parts of the longerons to the skins.
Finally, I drilled the holes that connect the side and the bottom skins together.
![Two pieces trimmed from the longerons.](/_app/immutable/assets/0-trimmed-longeron-pieces.CjgL-FWO.jpeg?nf_resize=smartcrop&w=180&h=180)
![The front right longeron is drilled.](/_app/immutable/assets/1-right-front-longeron.B9NqFWnG.jpeg?nf_resize=smartcrop&w=180&h=180)
![The front left longeron is drilled.](/_app/immutable/assets/2-left-front-longeron.Db3vFk49.jpeg?nf_resize=smartcrop&w=180&h=180)
![The bottom and the side skin holes drilled.](/_app/immutable/assets/3-bottom-skin-holes.CVWnfkd6.jpeg?nf_resize=smartcrop&w=180&h=180)