Priming the leading edge parts.
4h
November 28, 2024
Continue reading →
Priming the aileron ribs and the spar
2h
September 17, 2024
Continue reading →
Priming more ribs and drilling the aileron spars
4h
September 15, 2024
Continue reading →
Priming the aileron skins
1.5h
September 13, 2024
Continue reading →
Priming the aileron stiffeners
1.5h
September 8, 2024
Continue reading →
Priming the second set of wing ribs
2.5h
September 2, 2024
Continue reading →
Priming the first set of wing ribs
3h
August 25, 2024
Continue reading →
Priming the flaps parts
3h
April 24, 2024
Continue reading →
Assembling the aileron hinges and priming the spars
2h
March 24, 2024
Continue reading →
Priming the doublers and the aileron brackets
3h
March 22, 2024
Continue reading →
Finishing the baggage bulkheads
2h
February 24, 2024
Continue reading →
Working on elevator control stops
2h
September 1, 2023
Continue reading →
Priming various parts
1.5h
August 23, 2023
Continue reading →
Priming aft skins
2h
July 29, 2023
Continue reading →
Priming the baggage floors
1h
July 19, 2023
Continue reading →
A bit of priming work
2h
July 16, 2023
Continue reading →
Priming the canopy decks and the aft deck
1.5h
June 28, 2023
Continue reading →
Few more parts are primed
2.5h
June 21, 2023
Continue reading →
Three little tasks
3h
April 22, 2023
Continue reading →
Installing the left skin
6h
April 16, 2023
Continue reading →
Primed some parts
2h
April 7, 2023
Continue reading →
Priming the brackets
1h
January 31, 2023
Continue reading →
Priming the parts of the center section
3h
December 31, 2022
Continue reading →
Priming the seat backs and pushrods
4h
November 8, 2022
Continue reading →
Installing the nutplates and dimpling the skin
2h
October 23, 2022
Continue reading →
Priming the center section ribs
6h
October 22, 2022
Continue reading →
Priming J-stiffeners
3h
October 3, 2022
Continue reading →
Primed the aft fuselage skins
3h
October 1, 2022
Continue reading →
Priming the F-711 parts
1h
September 22, 2022
Continue reading →
Priming the F706 parts
3h
September 11, 2022
Continue reading →
Priming the firewall parts
2h
August 31, 2022
Continue reading →
Painting the replacement parts
3h
July 22, 2022
Continue reading →
Priming the trim tab skin and rebuilding the bearing assembly
4h
July 10, 2022
Continue reading →
Priming the right elevator understructure parts
2.5h
June 27, 2022
Continue reading →
Priming the elevator skin parts
4h
June 19, 2022
Continue reading →
Countersinking the rudder wedge and priming
3h
June 7, 2022
Continue reading →
Priming the skins and the stiffeners
2h
June 2, 2022
Continue reading →
Priming the ribs and preparing the front spar
4h
May 20, 2022
Continue reading →
Priming the skins and the spars
5h
May 17, 2022
Continue reading →
Priming the vertical stabilizer
2.5h
May 9, 2022
Continue reading →
Building a paint booth
2h
May 8, 2022
Continue reading →