Riveting aileron fairings and flap braces.
3h
September 16, 2025
Continue reading →
Finished riveting the top skins and made a wing cradle.6h
August 24, 2025
Continue reading →
Riveting the top skins.3h
August 17, 2025
Continue reading →
Riveting the rear baffle.4h
August 3, 2025
Continue reading →
The inboard rib and the z-brackets.4h
August 2, 2025
Continue reading →
The outboard rib and the reinforcing ring.2h
June 28, 2025
Continue reading →
The outboard rib and the reinforcing ring.2.5h
June 22, 2025
Continue reading →
Riveting the fifth rib.2h
June 7, 2025
Continue reading →
Riveting the fourth rib.2h
May 31, 2025
Continue reading →
Riveting the third rib.2h
May 17, 2025
Continue reading →
Riveting the second rib.2h
May 10, 2025
Continue reading →
Riveting the first rib.2.5h
May 4, 2025
Continue reading →
Riveting the stiffeners.2.5h
May 3, 2025
Continue reading →
Riveting the fuel flange and the fuel vent.1.5h
May 2, 2025
Continue reading →
Riveting the left leading edge to the main spar.2h
April 6, 2025
Continue reading →
Assembling the left leading edge.4h
March 24, 2025
Continue reading →
Priming the left leading edge.2h
March 23, 2025
Continue reading →
Finished riveting the top skins.2h
March 20, 2025
Continue reading →
Riveting the aileron brackets.2h
March 7, 2025
Continue reading →
Riveting the top skins.2h
March 5, 2025
Continue reading →
Deburring the skins.2h
January 26, 2025
Continue reading →
Riveting the leading edge to the main spar.2h
January 20, 2025
Continue reading →
Installing the rear baffle.3h
January 5, 2025
Continue reading →
Working on the fuel sender plate.1h
December 31, 2024
Continue reading →
The inboard rib and the fuel sender.2.5h
December 26, 2024
Continue reading →
The outboard rib.3h
December 25, 2024
Continue reading →
The fifth rib and a vent line.2.5h
December 24, 2024
Continue reading →
The fourth rib.2.5h
December 23, 2024
Continue reading →
The third rib.2.5h
December 21, 2024
Continue reading →
Riveting the second rib.2.5h
December 15, 2024
Continue reading →
Riveting the first rib.4h
December 14, 2024
Continue reading →
Riveting stiffeners to the fuel tank skin.6h
December 8, 2024
Continue reading →
Riveting the leading edge.4h
November 29, 2024
Continue reading →
Riveting the main ribs to the rear spar.4h
October 16, 2024
Continue reading →
Riveting the main ribs.5h
October 13, 2024
Continue reading →
Finishing the right aileron.1h
September 20, 2024
Continue reading →
Riveting the right aileron4h
September 19, 2024
Continue reading →
Riveting the left aileron5h
September 18, 2024
Continue reading →
Riveting the aileron stiffeners2h
September 14, 2024
Continue reading →
Riveting the flaps6h
April 25, 2024
Continue reading →
Various smaller tasks3h
April 12, 2024
Continue reading →
Finished riveting the rear spars1h
March 25, 2024
Continue reading →
Assembling the aileron hinges and priming the spars2h
March 24, 2024
Continue reading →
Finishing the baggage bulkheads2h
February 24, 2024
Continue reading →
Finishing the access panels2h
February 21, 2024
Continue reading →
Finishing the service bulletin SB-000365h
August 24, 2023
Continue reading →
Priming various parts1.5h
August 23, 2023
Continue reading →
Finished riveting aft skins2h
August 20, 2023
Continue reading →
Installing the nutplates1.5h
August 19, 2023
Continue reading →
Riveting the aft fuselage skins1h
August 13, 2023
Continue reading →
Riveted the right baggage floor3h
July 21, 2023
Continue reading →
Riveted the gussets and the left baggage floor3h
July 20, 2023
Continue reading →
Riveting the floors and the gussets3h
July 17, 2023
Continue reading →
Riveting the external steps2.5h
July 9, 2023
Continue reading →
Riveting the canopy decks, F-709 bulkhead and the shoulder harness anchors2h
June 30, 2023
Continue reading →
Riveting the aft deck and the rudder brace2h
June 29, 2023
Continue reading →
The bellcrank channel and the remaining gusset2.5h
June 27, 2023
Continue reading →
Rolled over the canoe1.5h
June 24, 2023
Continue reading →
Riveting the right baggage bulkheads1.5h
June 22, 2023
Continue reading →
Fuselage almost riveted8h
June 18, 2023
Continue reading →
A bit more riveting2h
May 7, 2023
Continue reading →
Riveted the aft of the longeron1h
May 2, 2023
Continue reading →
Sealing the firewall3h
April 29, 2023
Continue reading →
Three little tasks3h
April 22, 2023
Continue reading →
Countersinking the F-704-H side plates1.5h
April 11, 2023
Continue reading →
Riveted F-704 to the central section4h
April 8, 2023
Continue reading →
Installing the aileron trim and the crotch strap brackets2h
February 1, 2023
Continue reading →
Finished riveting the aft section2h
January 28, 2023
Continue reading →
Few more F-711 rivets2h
January 21, 2023
Continue reading →
Few more aft fuselage rivets1h
January 19, 2023
Continue reading →
Riveting the remaining fuselage aft rivets2h
January 16, 2023
Continue reading →
Riveting the ribs and fitting the control column4h
January 1, 2023
Continue reading →
Riveted F-7041.5h
December 28, 2022
Continue reading →
Started working on F-704 bulkhead5h
December 22, 2022
Continue reading →
Riveting the seat backs and pushrods3h
November 9, 2022
Continue reading →
Finished riveting the center section2h
November 1, 2022
Continue reading →
Riveting the center section2.5h
October 30, 2022
Continue reading →
Repairing some flanges2h
October 25, 2022
Continue reading →
Riveting ribs to the bulkhead4h
October 24, 2022
Continue reading →
Finished riveting aft fuselage2h
October 8, 2022
Continue reading →
More of the aft fuselage riveting1h
October 6, 2022
Continue reading →
Continuing riveting the aft fuselage1h
October 5, 2022
Continue reading →
Dimpling and beginning of an aft fuselage riveting4h
October 4, 2022
Continue reading →
Starting the aft fuselage assembly2h
September 13, 2022
Continue reading →
Riveting the F706 bulkhead4h
September 12, 2022
Continue reading →
Riveting F705 together6h
September 3, 2022
Continue reading →
Priming the F705 bulkhead parts2h
September 2, 2022
Continue reading →
Riveting firewall together4h
September 1, 2022
Continue reading →
Riveting the left elevator6h
July 23, 2022
Continue reading →
Various small tasks3h
July 11, 2022
Continue reading →
Attaching the skin to the understructure3h
July 4, 2022
Continue reading →
Riveting the right elevator3h
June 28, 2022
Continue reading →
Riveting the stiffeners to the skins1.5h
June 24, 2022
Continue reading →
Riveting the stiffeners to the skins3h
June 20, 2022
Continue reading →
Riveting the trailing edge3h
June 17, 2022
Continue reading →
Riveting the rudder skin5h
June 13, 2022
Continue reading →
Dimpling the remaining parts and riveting the rudder3h
June 8, 2022
Continue reading →
Riveting the stiffeners and assembling the skeleton5h
June 3, 2022
Continue reading →
Finishing the vertical stabilizer4h
May 24, 2022
Continue reading →
Riveting the horizontal stabilizer10h
May 21, 2022
Continue reading →
Riveting the vertical stabilizer5h
May 10, 2022
Continue reading →
Riveting together2h
March 17, 2022
Continue reading →
Backriveting stiffeners and riveting skeleton2h
March 16, 2022
Continue reading →